BMWklub.sk

Viete mi niekto poradit ci sa da velky BC nejak nastavit aby spravne ukazoval niektore hodnoty? Domontoval som si ho do auta, vsetko ukazuje spravne okrem spotreby aktualnej alebo priemernej. BC je z auta z roku 94 a ja mam auto rok 92, niekde mam zoznam tych svabov co sa davaju zo zadu a ma tam ist iny podla toho. Vraj by mi ti nemalo vobec fungovat ale funguje mi vsetko len spotrebu mi ukazuje asi o 3L/100km viac. Nepomoze ani ak prehodim riadiacu jednotku z auta kde bol ten BC. Nechcem zbytocne vyhodit 35,- eur za ten cip ak to nepomoze...

skus sa pozriet v tomto ,,utajenom menu" OBC IV http://e34.virtualtuning.sk/index.php?topic=21.0

pozeral som ale neda sa tam nic take nastavit

a ked ho skusis nejako resetnut ?? ze by sa dal do tovarneho nastavenie

myslim ze sa cely restuje uz len tym ze ho vymontujem a dam do ineho tds

sucinitel korekcie

fioro napísal:

sucinitel korekcie

http://bmwe34.ic.cz/obc.html

v tom linku od hessyho...akurat ta funkcia 20 chyba...

viem že je trochu neskoro, ale dopátral som sa čohosi, ak by ti to alebo niekomu ešte mohlo pomôcť ohľadom toho "kalibrovania"
If the OBC appears to be reporting inaccurate fuel consumption figures it can be calibrated to give the correct values. - Fill the fuel tank to the maximum and reset the trip counter and one of the OBC's average fuel consumption monitors. Run the fuel tank nearly empty and fill the fuel tank again to the maximum. The amount of fuel it now takes to fill the tank is the amount used to cover the distance recorded on the trip meter so, from this, work out the actual fuel consumption of the car and then compare this to what the OBC reported as the average fuel consumption. If these two average fuel consumption figures are not exactly the same then you need to calibrate the OBC by entering a new correction factor.
The fuel consumption correction factor is a locked function of the OBC so before you can access it, you must first unlock the OBC - Access the OBC test menu by simultaneously pressing the 1000 and 10 keys so that the display changes to "TEST". With the 10 & 1 keys enter 19 on the display and then press the S/R button. Add the current day and month (as it is known to the OBC) and enter this value and then press the S/R button, the OBC should now be unlocked. To access the fuel consumption calibration factor you once more need to simultaneously press the 1000 and 10 keys so that the display changes to "TEST". With the 10 & 1 keys enter 20 (Be careful not to enter 21 as this will reset the OBC) on the display and then press the S/R button - you should now see something like 1000 CORR, this is your current correction factor. To calculate your new correction factor use the following:

new_correction_factor = old_correction_factor * actual_mpg / obc_mpg

Enter your new correction factor into the OBC using the 1000/100/10/1 keys and then press the S/R button. If you want to relock the OBC - enter function 19 again then press the C/F button to lock.