Strana 1 z 1

E70 Webasto parovanie dialkoveho

Napísané: Pondelok, 7. Júna 2021, 05:57
od DanySVK112
Ahojte

Mám originál od výroby v svojom BMW E70 webasto, ktoré funguje bez problémov okrem diaľkového. Čo som tu hľadal, tak som sa dočítal, že to treba spárovať nejako cez poistku ale nikto už nespomína môj model a ani ktorá poistka v tomto modeli BMW (e70) to je. Vedel by mi stým niekto pomôcť aké označenie a kde sa nachádza tá poistka?

Re: E70 Webasto parovanie dialkoveho

Napísané: Pondelok, 7. Júna 2021, 06:57
od starynovy
Coding BMW parking heater remote instructions:
To initialize a new hand transmitter, perform the following
operations from inside the vehicle:
•Close all doors on vehicle (vehicle must be unlocked!)
•Within 5 seconds: Turn ignition lock from terminal "0" toterminal "R" and then back to terminal "0" (by inserting and
removing key, insertion duration: 1 to 5 secs.)
•Within 5 seconds: Simultaneously press both buttons (1, 2)on hand transmitter until LED (3) lights up orange.
•Release both buttons. Briefly press ON button (1) threetimes within 10 seconds; LED (3) flashes orange as
confirmation.

Obrázok

Note:The vehicle's central locking closes and opens automatically on
successfulinitialization.Theinitialization process must be repeated if there is no
checkback signal from the central locking system.

Re: E70 Webasto parovanie dialkoveho

Napísané: Utorok, 8. Júna 2021, 05:47
od DanySVK112
Ďakujem... :D skusim

Re: E70 Webasto parovanie dialkoveho

Napísané: Streda, 9. Júna 2021, 08:49
od DanySVK112
starynovy napísal:
Coding BMW parking heater remote instructions:
To initialize a new hand transmitter, perform the following
operations from inside the vehicle:
•Close all doors on vehicle (vehicle must be unlocked!)
•Within 5 seconds: Turn ignition lock from terminal "0" toterminal "R" and then back to terminal "0" (by inserting and
removing key, insertion duration: 1 to 5 secs.)
•Within 5 seconds: Simultaneously press both buttons (1, 2)on hand transmitter until LED (3) lights up orange.
•Release both buttons. Briefly press ON button (1) threetimes within 10 seconds; LED (3) flashes orange as
confirmation.

Obrázok

Note:The vehicle's central locking closes and opens automatically on
successfulinitialization.Theinitialization process must be repeated if there is no
checkback signal from the central locking system.

Funguje :D :D Ďakujem